Astatic D104 Power Mic
|The ASTATIC D104-M6 "power" microphone offers the CB'er modern styling and features along with the sound and "talk-power" made famous by the ASTATIC D104 for over 60 years.
An output impedance compatible with the inputs of almost all commercial transceivers and externally adjustable high gain amplifier ensures desired modulation level. The d104-M6 has easily accessible rear control for volume adjustment so that the correct modulation level can be set for each operators voice. The D104-M6 preamplifier is powered by a readily available, easily replaced, 9 volt battery. The D104-M6 has a six wire coil cord which allows for relay, electronic or virtually any type hookup with almost any transceiver. The audio line is open during receive.
|Frequency Response||100 to 10,000 Hz|
|Impedance||5000 Ohm max., recommended load of 100 ohms and up; performs well over entire impedance range up to open circuit|
|Output Level||-44 dB below 1 volt per microbar at 1 kHz into 1 megohm load|
|Output Adjustment||Approximately 40 dB range|
|Connector||Available stripped and tinned or configured with 4 pin (DX1) or 5 pin (DX2) DIN. Cable: Five conductor (one conductor shielded) coiled cord that extends to 2.3 m (7 1/2 ft.). Durable strain relief bushing protects against cable breakage at microphone housing.|
|Housing||Durable high impact molded black ABS|
|Battery||Standard 9 Volt Battery (Included)|
Click To Enlarge
- Item #: d104